Guangzhou Lanco Industry Co., Ltd.
providing professional service, high quality product and competitive cost for global clients.
Add to Cart
Stainless Steel Factory Fast Cooling Low Power Automatic Flake Ice Maker Machine,1000kg/24h
1000kg/24h Stainless Steel Full-auomatic mini potable ice maker machine/ice dispenser/ice cube maker/ice maker/ice machine
More than 30 years professionally produce the high quality refrigerated products,export a lots all over the world every year. Famous brand compressor,stable excellent quality,working highly efficient in an energy-saving way.
We can supply a complete range of refrigeration equipment,including China best home refrigerator, chest freezer,beverage cooler and ice cream showcase, wine cooler, ice maker, cake showcase, kitchen refrigeration equipment, car refrigerator,absorption refrigerator and truck air conditioner etc..
Product Application:
This small commercial ice machine is mainly used in hotels,bars,KTV,supermarkets,cafeterias,sushi bar,hotpot shops,aquatic products processing,food processing,vegetable transportation etc.,ice production from 300kg/24h to 2500kg/24h,which can meet the commercial ice demand.Customers can choose the complete set or separate set according to the different application.
Full-Auomatic Ice Maker / Ice Making Machine / Cube Ice Maker Machine
Flake ice maker:
| NO. | NAME | MODEL | QTY | REMARK |
| 1 | Compressor | ZB38KQE 5HP | 1 | COPELAND |
| 2 | Refrigerant Oil | 3GS | 1 | |
| 3 | Condenser | FNH-52-`.0T | 1 | |
| 4 | Fan | B500 | 1 | |
| 5 | Refrigerant receiver | CR103 | 1 | AIRMENDER |
| 6 | Oil filter | C-083(3/8”) | 1 | SPORLAN |
| 7 | Solenoid valve | 10S | 1 | SANHUA |
| 8 | Expansive Valve | C8S-SW+5# | 1 | SPORLAN |
| 9 | Evaporator | 1.0 T(1000KG/24H) | 1 | |
| 10 | Reducer | 1 | ||
| 11 | Circulating pump | 1 | ||
| 12 | Brine pump | 1 | ||
| 13 | Switch of Ice Full | Infrared switch | 1 | |
| 14 | Water tank | 304# | 1 | |
| 15 | Refrigerant | R404a | 1 | |
| 16 | PLC | 5HP | 1 | |
| 17 | Circulating pump | 1 | ||
| 18 | Brine pump | 1 | ||
| 19 | Low pressure gauge | |||
| 20 | High pressure gauge | 1 | ||
| 21 | Ice storage bine | B300 | 1 | 1280x1100x1060mm |
| 22 | Ice making unit | 1 | 1280x1100x900mm |
Feature:
1. Dispense ice automatically,no need scoop
2. Add water by manual or automatically
3. The thickness of flake ice is 1.5~2.5mm
4. Serve fresh ice to guests as short as 3minutes
5. Automatically replensihes ice as required
6. Compression and silent air cooling
7. High efficiency compressor without CFC for ultra fast refrigeration
8. Indicator & alarm are included so you know exactly when to add water or when empty the ice bin
9. Modern silver finish & contemporary design to fit any place
10.Easy to move and convenient to use.
11.Energy saving,automatic switch off once ice full or water not enough
12.Perfect for everyday use,in home,office,camping,cafes,restaurant bars etc.
Installation instructions:
1. the refrigerating machine placement
(1) the machine should be placed in the air circulation, safe and clean place.
(2) the machine should not be placed outdoor, unfavorable under direct sunlight and rain.Not near the heat source.
(3) the use of the machine environment cannot be lower than 5 ℃, no more than 38 ℃.
(4) around the machine should have enough space, especially the back not less than 250 mm.In order to machine the cooling.
(5) please adjust the machine at the bottom of the anchor bolt to ensure smooth placed level.
2. the installation of a water system
(1) please plug in accordance with local water source of drinking water standards.
(2) connected to the filter when necessary, in order to improve the standard of drinking water.
(3) the water supply system must meet the following conditions.
A. the lowest temperature 2 ℃, the highest do not exceed 38 ℃
B. water pressure the lowest 0.02 Mpa, the highest 0.8 Mpa
3. the installation of power supply
(1) the power supply must be consistent with the machine indicated on the nameplate.
(2) all lines must be in conformity with the national standard.
(3) must be reliable grounding, grounding wire must meet the electrical standards.
(4) voltage fluctuation may not exceed the rated voltage of plus or minus 10%.
Instructions:
1. ice making process
(1) must be checked before starting the automatic water supply device is normal, the tank to save water is reasonable (the machine factory has just the water level, the user can be reset).
(2) the plug in the power supply, ice making machine began to work, first of all, the pump running, the exhaust air pump has a short process) compressor started about two minutes later, into ice making machine.
(3) when to set the thickness of the ice thickness, ice plate probe began, electromagnetic valve start to work, water pump stop working, and the heat into the evaporator, about 1.5 minutes of ice.When I fall on the ice to the ice dampers inside out and open the magnetic reed switch.When magnetic reed switch closed again, the machine into the ice making process again.
(4) the compressor in the entire process of ice and ice off, don't stop.
(5) when water ice barrel for a full, magnetic reed switch cannot be automatically closed, the machine automatically stop working, and when taken enough ice, magnetic reed switch after reclosing time delay machine start after 3 minutes, back into the ice making process.
2. the thickness of ice bridge is
(1) the thickness of the ice bridge should be about 3 mm, between the probe and the evaporator international should be thicker than the actual thickness of the ice bridge 1.5 mm or so, mouth turn adjusting screw clockwise to increase the thickness of the ice bridge (screw rotation 1/3 circle ice bridge thickness change 1.5 mm).
(2) check the ice plate probe connections and bracket, should guarantee the free rotation after each process of ice can be returned to the right place.
The cause of the problem:
| The ice maker compressor discontinuous work: 1, the voltage is too low.Check the power supply. 2, the contact point contact is not good. 3, the system pressure protection. 4, compressor starter malfunction. | Lack of ice production 1, the capillary or expansion valve block. 2, high moisture system with mild ice wall. 3, ice making machine water supply is not enough. 4, lack of refrigerant or leakage. 5, evaporator spoils. |
| Wet ice ice is not hard 1, the environment temperature is too high especially in the summer will have a kind of situation. 2, maintenance of machine refrigerant added. 3, plate ice machine water water supply is too large. 4, press the power shortage. | Machine but not out of the ice 1, the baffle plate of water or no water enough. 2, speed reducer failure or gear motor. 3, system fault ice wall.Dirty plugging, etc. |
| Ice machine leaking 1, Inlet valve supply water tray is too large. 2, connecting pipe is broken. 3, the coupling fault. 4, water level float valve failure. | Too much noise 1, ice barrel fault ice skates. 2, brine concentration was not enough. 3, speed reducer failure. 4, fan fault. 5, noisy compressor. |
| Water shortage alarm 1, filter plugging water joint. 2, water supply pipe wall. 3, drainage pump impeller or drainage pump failure. |
FAQ:
1. Q: How about the quality?
A: We use all the best high quality raw material and professionally produce.
2. Q: Which style should we choose?
A: We have many models for your choice. Please tell us the application, materials, output and pressure all what you wanted, then we'll introduce.
3. Q: Can we have customized model?
A: Yes. We can make the customized machine according to your correct requirements.
4.Q: What should we do if there are some problems with the machine?
A: You can refers to the Operate Instruction or contact us for online instruction. Also, our engineers are available to service overseas.
5.Q: What is the delivery time?
A: 2 weeks for sample model, 30 days for customized model. It depends for mass production.
6.Q: How about the package?
A: We have plywood case to protect the machine from damage during the long-distance delivery.
7.Q :How about the payment?
A: TT, 30% deposit + 70% before shipment.